Sending UDP Data (standard interface)
Part of the FreeRTOS+TCP Networking Tutorial

static void vUDPSendUsingStandardInterface( void *pvParameters )
{
Socket_t xSocket;
struct freertos_sockaddr xDestinationAddress;
uint8_t cString[ 50 ];
uint32_t ulCount = 0UL;
const TickType_t x1000ms = 1000UL / portTICK_PERIOD_MS;

   /* Send strings to port 10000 on IP address 192.168.0.50. */
   xDestinationAddress.sin_addr = FreeRTOS_inet_addr( "192.168.0.50" );
   xDestinationAddress.sin_port = FreeRTOS_htons( 10000 );

   /* Create the socket. */
   xSocket = FreeRTOS_socket( FREERTOS_AF_INET,
                              FREERTOS_SOCK_DGRAM,/*FREERTOS_SOCK_DGRAM for UDP.*/
                              FREERTOS_IPPROTO_UDP );

   /* Check the socket was created. */
   configASSERT( xSocket != FREERTOS_INVALID_SOCKET );

   /* NOTE: FreeRTOS_bind() is not called.  This will only work if
   ipconfigALLOW_SOCKET_SEND_WITHOUT_BIND is set to 1 in FreeRTOSIPConfig.h. */

   for( ;; )
   {
       /* Create the string that is sent. */
       sprintf( cString,
                "Standard send message number %lu\r\n",
                ulCount );

       /* Send the string to the UDP socket.  ulFlags is set to 0, so the standard
       semantics are used.  That means the data from cString[] is copied
       into a network buffer inside FreeRTOS_sendto(), and cString[] can be
       reused as soon as FreeRTOS_sendto() has returned. */
       FreeRTOS_sendto( xSocket,
                        cString,
                        strlen( cString ),
                        0,
                        &xDestinationAddress,
                        sizeof( xDestinationAddress ) );

       ulCount++;

       /* Wait until it is time to send again. */
       vTaskDelay( x1000ms );
   }
}